Water Gardening Direct
 
Ask Us A QuestionRequest A Free BrochureSearch For A ProductTell A Friend About Us
Call Our Helpline
 
  
Security and Privacy Policy Security and Privacy Policy
Quick Search
Items Ordered : , Order Value :
Pond, Garden and Water Feature Product Index .. Water Features ..

Pebble Pool Features


Copper Water Features

Bubbling and cascading water are the themes for these handmade sculptures. Set on copper stems these features really enhance the movement of water, providing a highly attractive visual centrepiece to any water feature setting.
Arcadian Single Fountain Arcadian Single Fountain(HAW001)

An absolutely stunning feature when running, the arcadian single fountain looks a little like a bird bath with water bubbling up in the middle and water cascading in a circle of fine water columns around the outside circumference. This water feature is made from a unique cast stone mix and as such is not light at 27Kg. We recommend the Victoria 90 and sump and Grid shown below. To obtain the best display a pump which produces 1000-1550 litre per hour is recommend.
Height 470mm, Diameter at top 457mm.

Price:  £149.99 Inc Vat

Arcadian Spiral Egg Arcadian Spiral Egg(HAW003)

This feature looks magnificent when running. The water erupts through the centre of the egg and then runs down the spirals in the design. Made from a unique cast stone mix this feature weights at 80Kg. We recommend the Victoria 90 sump and Grid shown below. To obtain the best display a pump which produces 1000-1550 litre per hour is recommend.
Height 500mm, Diameter at widest point 380mm.

Price:  £210.00 Inc Vat

Arcadian Spiral Tower Arcadian Spiral Tower(HAW002)

Another stunning feature from Haddenstone. This water feature is made from a unique cast stone mix. The water is pumped up through the centre and bubbles up at the top cascading down the twisted steps, creating a lot of rippling and moving water. The feature weighs 62kg so needs a sturdy reservoir, we recommend the Victoria 90 and sump and Grid shown below. To obtain the best display a pump which produces 1000-1550 litre per hour is recommend.
Height 800mm, Width at base 200mm Widest point 250mm.

Price:  £199.99 Inc Vat

Victoria Feature Ponds Victoria Feature Ponds(UBWx01)
Very strong and sturdy water reservoirs which can be used for water features, ponds or holding tanks. They can be installed in the ground or free standing. When used for water features the
Victoria ponds can be used in conjunction with the Metal Grids or the Ontario cover. Unlike other water feature reservoirs they will hold plenty of water.
Three size available:-
Victoria 60 - 590mm Dia x 350mm Deep and holds 90 litres
Victoria 90 - 880mm Dia x 320mm Deep and holds 150 litres
Victoria 112 - 1.1m Dia x 350mm Deep and holds 275 litres

UBW010 Victoria 60 - £16.99
UBW001 Victoria 90 - £26.99
UBW000 Victoria 112 - £44.99




Please select the Size Required

Round Metal Grid for Victoria 90 - 900mm Dia Round Metal Grid for Victoria 90 - 900mm Dia (UBW004)
Strong sturdy grids suitable for 150kg/m² with a 4cm x 4cm mesh. Ideal for covering a rigid or flexible reservoir liner, including the Victoria or Quadro reservoirs. The hole in the grid allows simple access to the pump without dismantling the feature. The access plate can be used to fill in the hole.



Price:  £59.98 Inc Vat

Metal Grid Access Plate Metal Grid Access Plate(UBW006)
Suitable for both above grids. This insert rests on the edges of the hole allowing it to be covered with same material as the grids.
Dimensions 200mm x 200mm.






Price:  £6.99 Inc Vat

Ontario Cover Plates Ontario Cover Plates(UBW007)
Cover plates suitable for the Victoria 60, 90 and 112 sumps, which are capable of holding an evenly distributed load of up to 100 Kg. The Ontario cover plates have a moulded cable exit, three pre - drilled 30mm dia holes for hose or fixing a feature to and a removable access cap (Dia 120mm).


UBW011 Ontario 60 - £27.99
UBW007 Ontario 90 - £42.99
UBW009 Ontario 112 - £77.99




Please select the Size Required

Victoria Quadro 3 Victoria Quadro 3(UBW003)
Made from the same sturdy material as the Victoria and can be used in exactly the same way, but the Quadro is rectangular allowing it to fit up flush with straight edges. The Quadro is 800mm long x 630mm wide and 380mm deep and holds 150 litres (33 gallons). Ideal for use with the 300 and 600mm Sheer descents.


Price:  £32.99 Inc Vat

Metal Grid for Quadro 3 - 730mm x 585mm Metal Grid for Quadro 3 - 730mm x 585mm(UBW008)
Strong sturdy grids suitable for 150kg/m² with a 4cm x 4cm mesh. Ideal for covering a rigid or flexible reservoir liner, including the Victoria or Quadro reservoirs. The hole in the grid allows simple access to the pump without dismantling the feature. The access plate can be used to fill in the hole.



Price:  £56.99 Inc Vat

Finia Pebble Pool Bases Finia Pebble Pool Bases(RFW000)
A range of strong pebble pools for heavier or larger features. Made from 100% recycled plastic the segmented design gives greater support to your water feature. Each unit is supplied as three parts, base, lid and removable access plate to get at the pump. If the weigh of your feature exceeds the recommended weight tolerance and/or is unevenly distributed, back-fill with soil or concrete. We offer three sizes 1000, 1375 and 1800.

The Finia 1000 is 980mm (38½”) in diameter and 300mm (12”) deep will take an evenly distributed weight of up to 250kg and holds 90 litres of water.

The Finia 1375 uses the 1000 sump, but has a square lid which measures 1375mm in each direction, the weight and water volume are the same as the 1000.

The Finia 1800 is 1800mm (70”) in diameter and 350mm (13½”) deep and will take evenly distributed weight of up to 1000kg and holds 420 litres of water.

RFW001 Finia 1000 - £96.99
RFW002 Finia 1375 - £174.99
RFW003 Finia 1800 - £399.99

Please note that these bases are not available for Next Day Delivery




Please select the Size Required


Water Gardening Direct Ltd
.