Collection: Black Knight Filter Brushes

Black Knight Filter Brushes

Black Knight filter brushes are made from the very highest quality Hydrotek polypropylene twisted into two stainless steel wires to form a cylindrical brush with a loop at one end for hanging. The other end is capped with a plastic knob for safety. They last indefinitely and are the easiest to use, most efficient and most cost-effective pond filter medium you can buy. Our brushes are used in filtration systems in fish farms, hatcheries, public aquaria, domestic fish ponds and research institutes in this country and abroad. No other filter medium is as widely used or has been as extensively tested and proved.

How to use Black Knight Filter Brushes
If you have a small pond with a few goldfish and a couple of Koi then a single chamber with three to six lines of brushes will be ideal. For a more demanding situation, it will be necessary to use a much larger chamber or to link two or three together. These can all contain brushes or you can use them in the first and second chambers and then other media, such as Kplus or foam, in the last chamber. When designing your layout remember to include an overlap so the brushes interlink. 

Black Knight Filter Brush Benefits
• Great for both biological and mechanical filtration
• Low unit cost
• Easy to clean
• Very effective at reducing foam filter cleaning
• Massive surface area for biological colonisation

Black Knight Filter Brush Sizes
The measurements given refer to the main body of the brush, every brush has a 3 inch (8cm) top ring and a ¾ inch (1.5cm) bottom spike

4 inch (10cm) Filter Brushes
• 4" x 9" ( 10cm x 23cm)
• 4" x 12" (10cm x 30cm)
• 4" x 16" ( 10cm x 40cm)
• 4" x 20" ( 10cm x 50cm)

6 inch (15cm) Filter Brushes
• 6" x 12" (15cm x 30cm)
• 6" x 16" ( 15cm x 40cm)
• 6" x 20" ( 15cm x 50cm)

8 inch (20cm) Filter Brushes
• 8" x 16" (20cm x 40cm)