Oase BioTec 40000 - ScreenMatic 2 Pond Filters
Oase BioTec 40000 - ScreenMatic 2 Pond Filters
Oase BioTec 40000 - ScreenMatic 2 Pond Filters
With the introduction of the BioTec 40000 ScreenMatic 2 Filters Oase have shown that they are always innovating and improving their pond filters. The New and upgraded BioTec ScreenMatic 2 range now features an improved coarse debris system and electronic control system. Simple operation, fast, clean maintenance and outstanding filtration are the results. A specially designed sieve catches all debris particles above 300 microns that arrive in the filter. The sieve has been designed as a belt which rotates when dirty via a built-in 12v motor and is scraped clean as it turns. The dirt build up on the screen is monitored by a new sensor system which only operates the 12v motor when needed, thus saving running costs and wear and tear. The waste falls in to an increased capacity tray for disposal. The water which is enriched with oxygen, then falls into the chamber below, flows through the filter zones and then reaches the next filter chamber. The friendly filter bacteria present in the pond water settle and multiply in the oxygen rich sponges. The individual chamber situated just in front of the outlet holds a number of Zeolite filled cartridges which are ideal when starting up the filter. Once established the material inside can be changed to PhosLess (not supplied) which will help prevent algae growth in the pond. Each filter is also supplied with a plunger to allow for easy cleaning of the foam cartridges and a brush to aid cleaning of the belt. Once the foams have been squeezed out a valve is pulled and the dirty water drains from the tank. The drain is at the bottom of the BioTec 40000 ScreenMatic 2 Filter is 50mm.
The Oase BioTec 40000 - ScreenMatic 2 Pond Filters are supplied with a 2 year guarantee which can be upgraded to 3 years by registering your purchase with Oase.
The outlet for this filter takes 75mm rigid pushfit pipework or 75mm flexible pipework (not included).
Oase BioTec 40000 ScreenMatic 2 Pond Filter Features
• Intelligent filter system for fish ponds up to 20m³ (20000 litres)
• The automatic coarse debris extraction using "conveyer belt" sieve technology
• High quality filter sponges for biological filtration
• Intelligent control functions
• Simple plug & play operation
• 300 µm first stage cleaning sieves
• Pollutant discharge using included slide valve
With the introduction of the BioTec 40000 ScreenMatic 2 Filters Oase have shown that they are always innovating and improving their pond filters. The New and upgraded BioTec ScreenMatic 2 range now features an improved coarse debris system and electronic control system. Simple operation, fast, clean maintenance and outstanding filtration are the results. A specially designed sieve catches all debris particles above 300 microns that arrive in the filter. The sieve has been designed as a belt which rotates when dirty via a built-in 12v motor and is scraped clean as it turns. The dirt build up on the screen is monitored by a new sensor system which only operates the 12v motor when needed, thus saving running costs and wear and tear. The waste falls in to an increased capacity tray for disposal. The water which is enriched with oxygen, then falls into the chamber below, flows through the filter zones and then reaches the next filter chamber. The friendly filter bacteria present in the pond water settle and multiply in the oxygen rich sponges. The individual chamber situated just in front of the outlet holds a number of Zeolite filled cartridges which are ideal when starting up the filter. Once established the material inside can be changed to PhosLess (not supplied) which will help prevent algae growth in the pond. Each filter is also supplied with a plunger to allow for easy cleaning of the foam cartridges and a brush to aid cleaning of the belt. Once the foams have been squeezed out a valve is pulled and the dirty water drains from the tank. The drain is at the bottom of the BioTec 40000 ScreenMatic 2 Filter is 50mm.
The Oase BioTec 40000 - ScreenMatic 2 Pond Filters are supplied with a 2 year guarantee which can be upgraded to 3 years by registering your purchase with Oase.
The outlet for this filter takes 75mm rigid pushfit pipework or 75mm flexible pipework (not included).
Oase BioTec 40000 ScreenMatic 2 Pond Filter Features
• Intelligent filter system for fish ponds up to 20m³ (20000 litres)
• The automatic coarse debris extraction using "conveyer belt" sieve technology
• High quality filter sponges for biological filtration
• Intelligent control functions
• Simple plug & play operation
• 300 µm first stage cleaning sieves
• Pollutant discharge using included slide valve
Use the table below to select the correctly sized item. If you have any difficulties deciding which size is right for you, contact us by email or phone and we will be very happy to assist you.
| Filter | Pond Volume Litres (gallons) |
Suggested Hose mm (inch) |
Dimensions LxWxD mm |
Max Flowrate LPH (GPH) |
Outlets mm |
|
Goldfish |
Koi |
|||||
| BioTec 40000 ScreenMatic 2 |
20000 (4400) |
10000 (2200) |
38 (1½) |
788 x 590 x 445 |
9000 (1980) |
1 x 75 |
| BioTec 60000 ScreenMatic 2 |
30000 (6600) |
15000 (3300) |
38 (1½) |
788 x 590 x 545 |
11000 (2420) |
1 x 75 |
| BioTec 90000 ScreenMatic 2 |
45000 (9900) |
22500 (4950) |
38 (1½) |
788 x 590 x 645 |
12500 (2750) |
1 x 110 |
| BioTec 145000 ScreenMatic 2 |
72000 (15840) |
36000 (7920) |
50 (2) |
1334 x 891 x 815 |
17500 (3850) |
1 x 110 |
Ask a question
If you need to ask a question about Oase BioTec 40000 - ScreenMatic 2 Pond Filters you can do so here.
This product is delivered from stock to mainland UK delivery areas using a Free Next Working Day (kerbside) Pallet Delivery Service* in most areas.
This product can also be dispatched to non UK mainland addresses, please see the table for delivery times and charges.
*We have a 10 am weekday cut-off for Next Working Day (kerbside) Pallet deliveries and do not dispatch on weekends or bank holidays.
| Pallet Delivery Details | |
|---|---|
Mainland UK Areas - 5 -7 Days FREE
|
|
Scotland Highlands - 5 -7 Days
AB36 - AB38, AB55 - AB56, FK17 - FK21, IV1 - IV39, IV52 - IV54, IV63, KW1 - KW14, PA21 - PA40, PH19 - PH26, PH30 - PH41, PH49 - PH50 £24.99 |
|
Scotland Islands - 5 -7 Days
HS1 - HS9, IV40 - IV51, IV55 - 56, KA27 - KA28, KW15 - 17, PA20, PA41 - PA49, PA60 - PA78, PH42 - PH44, ZE1 - ZE3 £44.99 |
|
Northern Ireland - 5 -7 Days £24.99
|
|
Isle Of Man - 5 -7 Days £44.99
|
|
Isle Of Wight - 5 -7 Days £17.99
|
|
| Jersey - 5 -8 Days £44.99 | |
Guernsey - 5 -7 Days £44.99
|
|
* Jersey and Guernsey prices do not include vat.
Full delivery information and conditions can be found on our Delivery Information page.
IMPORTANT - NON Mainland UK Delivery Customers
Please note that once your consignment has been dispatched it can not be cancelled. If upon delivery or for anytime thereafter you wish to return the product the cost of return is the responsibility of the customer. Should a product be found to be faulty on delivery or during the guarantee period, please contact us immediately so we can arrange for replacememt parts to be sent if required. Full detail on our returns policy.
