Bermuda Pond Aerator 20000 with LED

The Bermuda Pond Aerator 20000 with LED is a powerful floating pond aerator designed to improve oxygen levels, increase water circulation, and create an attractive fountain display in larger ponds and water gardens.

With a high 20000 litre per hour flowrate, this pond aerator helps maximise gas exchange at the pond surface, supporting a healthier and more balanced pond environment. The powerful 115W pump creates a large cone-shaped fountain display measuring approximately 240cm in diameter and 60cm high, making it both a practical aeration unit and an eye-catching water feature.

The pond aerator floats on the pond surface and is supplied with 2 x 9m thin nylon ropes to help secure it in position. This helps keep the fountain stable while still allowing it to sit neatly on the water. The unit measures approximately 400mm in diameter x 243mm deep and is suitable for operating temperatures from 5°C to 35°C.

The built-in 6 x 1W bright white LED lights allow the fountain to remain visible into the evening, adding extra impact after dark. The pump is supplied with 10m of mains cable, while the LED lights are supplied with 10m of low voltage cable and an indoor plug style transformer. The LED transformer should be installed in a dry indoor or suitably protected location.

The Bermuda Pond Aerator 20000 with LED has two running modes. Continuous Mode runs the pump at full power all the time for a steady fountain display. Gradient Mode gradually increases the fountain to maximum size and then reduces it again over approximately 30 seconds, creating a changing water display rather than a fixed spray pattern.

Bermuda Pond Aerator 20000 with LED Features

• Combines pond aeration, water circulation, and a decorative fountain effect
• Powerful 20000 litre per hour flowrate for larger ponds and water gardens
• Large cone-shaped fountain display, approximately 240cm wide and 60cm high
• Helps improve surface movement and gas exchange in the pond
• Built-in 6 x 1W bright white LED lights for evening visibility
• 115W pump delivers strong and steady performance
• Floating surface design with anchoring ropes for stability
• Continuous Mode runs the pump at full power
• Gradient Mode gradually increases and decreases the fountain size
• Supplied with 10m mains cable for the pump
• Supplied with 10m low voltage cable for the LED lights
• Includes indoor plug style LED transformer
• Includes 2 x 9m thin nylon ropes for securing the fountain
• Suitable for operating temperatures from 5°C to 35°C
• Includes a 12 month guarantee

Technical Specifications

• Maximum flowrate: 20000 litres per hour
• Pump power consumption: 115W
• Fountain display: approximately 240cm diameter x 60cm high
• Unit dimensions: 400mm diameter x 243mm deep
• Pump cable length: 10m mains powered
• LED lighting: 6 x 1W bright white LEDs
• LED cable length: 10m low voltage
• LED transformer: indoor plug style transformer
• Operating temperature: 5°C to 35°C
• Guarantee: 12 months

Please note: The LED lights are supplied with an IP20 indoor plug style transformer. The transformer is not designed to be left exposed outdoors and should be installed in a dry indoor location or housed inside a suitable weather-protected outdoor electrical enclosure. The cable connection is positioned at the top of the plug, so care should be taken to ensure it is protected from rain, splashing, and water ingress.