Black Knight Filter Brush - 4 inch x 16 inch (10cm x 40cm)

You Are Here : Spare Parts > General Replacement Parts > Black Knight Filter Brushes > Black Knight Filter Brush - 4 inch x 16 inch (10cm x 40cm)


Large image of Black Knight Filter Brush - 4 inch x 16 inch (10cm x 40cm)

Close this enlarged image of the Black Knight Filter Brush - 4 inch x 16 inch (10cm x 40cm)

Our Price:
£2.29

Quantity: 

Black Knight Filter Brush - 4 inch x 16 inch (10cm x 40cm)

Our Ref: BKS003
Feefo logo

Black Knight Filter Brush - 4 inch x 16 inch (10cm x 40cm)
Black Knight filter brushes are made from the very highest quality Hydrotek polypropylene twisted into two stainless steel wires to form a cylindrical brush with a loop at one end for hanging. The other end is capped with a plastic knob for safety. They last indefinitely and are the easiest to use, most efficient and most cost-effective pond filter medium you can buy. Our brushes are used in filtration systems in fish farms, hatcheries, public aquaria, domestic fish ponds and research institutes in this country and abroad. No other filter medium is as widely used or has been as extensively tested and proved.

How to use Black Knight Filter Brushes
If you have a small pond with a few goldfish and a couple of Koi then a single chamber with three to six lines of brushes will be ideal. For a more demanding situation, it will be necessary to use a much larger chamber or to link two or three together. These can all contain brushes or you can use them in the first and second chambers and then use a stone medium such as Lytag, Canterbury Spar or Alfagrog in the last chamber. The distance between the brushes should be as close to the recommended spacing as possible but the width of the chamber should be divided by the number of brushes required to give the spacing. For instance, a 31 1/4 inch (79.5cm) wide chamber would be divided by ten when using 4 inch (10cm) brushes, to give a spacing of 3 1/8 inch (8cm) between the brushes.

Black Knight Filter Brush Benefits
• Great for both biological and mechanical filtration
• Low unit cost
• Easy to clean
• Very effective at reducing foam filter cleaning
• Massive surface area for biological colonisation

Black Knight Filter Brush Sizes
The measurements given refer to the main body of the brush, every brush has a 3 inch (8cm) top ring and a ¾ inch (1.5cm) bottom spike

4 inch (10cm Filter Brushes
• 4" x 9" ( 10cm x 23cm)
• 4" x 12" (10cm x 30cm)
• 4" x 16" ( 10cm x 40cm)
• 4" x 20" ( 10cm x 50cm)

6 inch (15cm Filter Brushes
• 6" x 12" (15cm x 30cm)
• 6" x 16" ( 15cm x 40cm)
• 6" x 20" ( 15cm x 50cm)

8 inch (20cm Filter Brushes
• 8" x 16" (20cm x 40cm)

spacer

Customers Reviews


spacer

Why Buy From Us

FREE Delivery for Orders Over £50
(Uk Mainland excluding Highlands and Islands of Scotland)		Tick
1000's of Happy CustomersTick
1000's of Products in StockTick
Free Help and Advice from our Experienced Technical StaffTick
Over 20 Years Mail Order ExperienceTick
spacer

Secure Payments

Secure Online Payments
spacer

Follow Us

Manufacturers Details

Oase Pond ProductsHozelock Pond ProductsGordon Low Pond LinersEvolution Aqua Pond ProductsLotus Pond ProductsPontec Pond ProductsBlagdon Interpet Pond Products
Tetra Pond ProductsTAP Pond ProductsSmart Solar Garden ProductsJBL Fish Keeping ProductsAquaHydrotech - Ecoponds Pond ProductsFish mate and Pond Mate Pond ProductsWater Gardening Direct Pond Products